Digicom 2000 User Manual page 23

CHAPTER_.2A_ 4/8/00 11:19 PM
PROGRAM/ AREA/ PLAYING IMMEDIATE/ KEYBOARD
LOCK
PLAY SEQUENCE TIME LINK LAYOUT
SPEAK LEVEL DEFINE RECORD LINK BACKSPACE
AUTOSPEAK EDIT
ERASE
SEQUENCE SEQUENCE
Page 23
Selecting a Level and Switching
Between Levels
Once you have decided whether you want to
lock into one group, lock out some groups or
have access to all groups, you are ready to make
decisions about Levels. You will use the Level
feature frequently when using DigiCom. Switching
between levels will be something you will do while
programming and also something a
person communicating with DigiCom will do.
Each Group gives you access to eight (8) Levels
at a time. You can think of it as eight overlays on
top of one another. Each Level is programmed
separately. Therefore, you can program each
Level differently. You can determine different
Keyboard Layouts, messages, topics, etc. for each
Level. To program and speak between Levels you
first need to understand how to switch between
Levels.
To select a Level and switch between
Levels: Press the [Level] key.
LOCK
LEVELS
The first time you press it, you will see the current
LEVEL
level displayed in the LCD. You will see other
ERASE
setting information as well (group, system mode,
LEVEL
etc.). Each time you press [Level] after that, the
HOLDTIME SCAN
SET UP COMMAND
VOLUME VOLUME
DOWN UP
STOP REMOVE
< > OK CANCEL
DISK TRANSFER DigiCom will advance to the next level. By
pressing the [Level] key you will move sequentially
through each level from 1 through 8. You can
record on as few or as many levels as you wish.
If you wish to remain on only one level or have
access to only a few levels you have options to
"Lock In Levels" or "Lock Out Levels".
If you are working with a very young learner or
person starting with a limited vocabulary, pay
particular attention to both the "Lock in Levels"
and "Lock out Levels" features.
2–22