Digicom 2000 User Manual page 19

CHAPTER_.2A_ 4/8/00 11:19 PM
PROGRAM/ AREA/ PLAYING IMMEDIATE/ KEYBOARD
LOCK
PLAY SEQUENCE TIME LINK LAYOUT
SPEAK LEVEL DEFINE RECORD LINK BACKSPACE
AUTOSPEAK EDIT
ERASE
SEQUENCE SEQUENCE
Page 19
Selecting "Groups"
and "Levels"
Selecting a Group and Switching
LOCK
GROUPS
Between Groups
GROUP
To select a group and switch between
Groups:
HOLDTIME SCAN
VOLUME VOLUME SET UP COMMAND
STOP REMOVE DOWN UP
< > OK CANCEL
DISK TRANSFER
Press the [Group] key. (white key next to Volume
Down key)
The first time you press it, you will see the current
group displayed in the LCD. Each time you press
[Group] after that, the DigiCom will advance to
the next group. By pressing the [Group] key you
will move through each group from A through F.
You can record on as few or as many groups as
you wish.
If you wish to remain in only one Group or have
access to only a few Groups, you have options to
"Lock in Groups" or "Lock out Groups". These
features only become active in Play mode.
If you are a beginner with this device, pay
particular attention to the "Lock in Groups"
feature as you get started.
Lock Groups: Lock in Groups
All six groups are always available to you in
Program mode. All six groups can be available to
the user in Play mode. The DigiCom is shipped to
you with all 6 groups available. If you wish a user
to stay in any one group, you will use the "Lock in
Groups" feature. This will lock that group so you
stay in that group. Generally, you will make this
decision once and keep this programmed for a
lengthy period of time before making changes.
2–18