Digicom 2000 User Manual page 24

CHAPTER_.2A_ 4/8/00 11:19 PM
PROGRAM/ AREA/ PLAYING IMMEDIATE/ KEYBOARD
LOCK HOLDTIME
PLAY SEQUENCE TIME LINK LAYOUT
SPEAK LEVEL DEFINE RECORD LINK BACKSPACE STOP REMOVE
AUTOSPEAK EDIT
ERASE DISK TRANSFER
SEQUENCE SEQUENCE
PROGRAM/ AREA/ PLAYING IMMEDIATE/ KEYBOARD
LOCK HOLDTIME
PLAY SEQUENCE TIME LINK LAYOUT
SPEAK LEVEL DEFINE RECORD LINK BACKSPACE STOP REMOVE
AUTOSPEAK EDIT
ERASE DISK TRANSFER
SEQUENCE SEQUENCE
2–23
Page 24
Lock Levels: Lock in Levels
SET UP
All eight levels are normally available to the user
OK
in Play mode. If you wish a user to stay at any
one level, however; you may lock into that level
SCAN
SET UP COMMAND
VOLUME VOLUME so you stay on that level.
DOWN UP
< > OK CANCEL
To Lock a User into a Level:
LOCK
LEVELS
1. Make sure the DigiCom is in Program mode.
LEVEL
2. Press [SET UP] and then [Lock Levels].
ERASE
LEVEL
3. The display will show:
SCAN
VOLUME VOLUME SET UP COMMAND
DOWN UP
< > OK CANCEL
4. Press [OK] to go to the next decision. The
display will show:
you have 9 options: NONE or Levels 1, 2, 3, 4, 5, 6,
7, or 8
if you do not want to lock into a level, always
select NONE. (DigiCom is shipped with NONE as
the default setting for Level Lock.)
Lock in Levels
< > OK Cancel
Lock in:
< > OK Cancel