Digicom 2000 User Manual page 22

CHAPTER_.2A_ 4/8/00 11:19 PM
2–21
Page 22
Lock out Groups
7. Press the [<] or [>] key to select a number of
groups to lock out. Your options are: NONE, F,
E&F, D-F, C-F, and B-F.
8. Press [OK] to confirm your selection.
9. The display will return to:
GROUP A:Program
LEVEL1: Areas
10. In both Program and Play modes, the user
does not have access to those groups locked
out. The [Group] key will beep but will not
change status beyond the groups you have
made available.
11. To have full access to all the groups, return
to Program mode and press [SET UP] and
[Lock Groups] again. Repeat the above
sequence and select `NONE'.
12. The user now has access to all six groups.
"Lock in Groups" feature does not become
active until you are in Play mode. "Lock out
Groups" feature becomes available immediately
in Program mode.
(cont.)
8 HELPFUL HINT: