Digicom 2000 User Manual page 21

CHAPTER_.2A_ 4/8/00 11:19 PM
PROGRAM/ AREA/ PLAYING IMMEDIATE/ KEYBOARD
LOCK
PLAY SEQUENCE TIME LINK LAYOUT
SPEAK LEVEL DEFINE RECORD LINK BACKSPACE
AUTOSPEAK EDIT
ERASE
SEQUENCE SEQUENCE
PROGRAM/ AREA/ PLAYING IMMEDIATE/ KEYBOARD
LOCK
PLAY SEQUENCE TIME LINK LAYOUT
SPEAK LEVEL DEFINE RECORD LINK BACKSPACE
AUTOSPEAK EDIT
ERASE
SEQUENCE SEQUENCE
Page 21
Lock Groups: Lock out Groups
SET UP
All six groups are normally available to the user in
OK
Program mode. All six groups can be available to
the user in Play mode.
HOLDTIME SCAN
SET UP COMMAND
VOLUME VOLUME
STOP REMOVE DOWN UP
< > OK CANCEL
DISK TRANSFER
If you do not want to lock a user into just one
group, but wish a user to have access to a limited
LOCK
number of groups, you may lock out the remain-
GROUPS
GROUP
ing groups:
To lock a user out of groups while giving
HOLDTIME SCAN
VOLUME VOLUME SET UP COMMAND
STOP REMOVE DOWN UP
access to specific groups:
< > OK CANCEL
DISK TRANSFER
1. Make sure the DigiCom is in Program mode.
2. Press [SET UP] and then [Lock Groups].
3. The display will show:
4. Press [<] or [>] key to go to select 'Lock Out
Groups'. The display will show:
5. Press [OK].
6. The display will show:
Lock in Groups
< > OK Cancel
Lock out Groups
< > OK Cancel
Lock out: NONE
< > OK Cancel
2–20