Digicom 2000 User Manual page 30

CHAPTER_.2A_ 4/8/00 11:19 PM
2–29
Page 30
Selecting a Keyboard Layout
5. Press the [Keyboard Layout] key.
6. The DigiCom will display:
Keyboard: 4x12
(or another keyboard size, e.g. 2x4, 4x8, 1x3, 2x6,
1x2)
7. Press the [>] key to step forward or [<] to step
back through the possible keyboard layouts.
8. When the display shows the layout that
matches the current overlay, press [OK].
If this keyboard layout is different than before,
9. The DigiCom will display:
Erase Level?
10. Press [OK] to continue with the keyboard
layout change.
11. You may press [Cancel] at any time to quit
and leave the layout as it was.
You will notice that menu options `wrap' around.
If you are at the very beginning and want to get
to the very end, instead if pressing [>] many times
to step through the entire list, press [<] once to
jump to the end. This works in both directions.
OK Cancel
OK Cancel
8 HELPFUL HINT:
(cont.)