Network Setup Page - Cisco 3905 Administration Manual

Administration guide for cisco unified communications manager 8.6 (sip)
Hide thumbs Also See for 3905:
Table of Contents

Advertisement

Remote Monitoring
Item
PC Port Disabled
Speaker Enabled
GARP Enabled
Voice VLAN Enabled
DSCP for Call Control
DSCP for Configuration
DSCP for Services
Web Access Enabled
Span to PC Port
PC VLAN
CDP: PC Port
CDP: SW Port
Description
Indicates whether the PC port on the phone is enabled or disabled.
Indicates whether the speakerphone is enabled on the phone.
Indicates whether the phone learns MAC addresses from Gratuitous ARP
responses.
Indicates whether the phone allows a device attached to the PC port to access the
Voice VLAN.
DSCP IP classification for call control signaling.
DSCP IP classification for any phone configuration transfer.
DSCP IP classification for phone-based services.
Indicates whether web access is enabled (Yes) or disabled (No) for the phone.
Indicates whether the phone will forward packets transmitted and received on the
network port to the access port.
VLAN used to identify and remove 802.1P/Q tags from packets sent to the PC.
Indicates whether CDP is supported on the PC port (default is enabled).
Enable CDP on the PC port when Cisco VT Advantage/Unified Video Advantage
(CVTA) is connected to the PC port. CVTA does not work without CDP
interaction with the phone.
When CDP is disabled in Cisco Unified Communications Manager, a warning is
displayed, indicating that disabling CDP on the PC port prevents CVTA from
working.
The current PC and switch port CDP values are shown on the Settings menu.
Indicates whether CDP is supported on the switch port (default is enabled).
Enable CDP on the switch port for VLAN assignment for the phone, power
negotiation, QoS management, and 802.1x security.
Enable CDP on the switch port when the phone is connected to a Cisco switch.
When CDP is disabled in Cisco Unified Communications Manager, a warning is
presented, indicating that CDP should be disabled on the switch port only if the
phone is connected to a non-Cisco switch.
The current PC and switch port CDP values are shown on the Settings menu.
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)

Network Setup Page

69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unified sip phone 3905

Table of Contents