Set Dhcp Field; Set Ip Address Field - Cisco 3905 Administration Manual

Set DHCP Field

Option
TFTP Server 1
TFTP Server 2
DHCP Address
Released
Related Topics
Display Configuration Menu, on page 35
Password Protection, on page 36
Value Input Guidelines, on page 37
Set DHCP Field
Procedure
Step 1 Scroll to the DHCP option and press Select.
Step 2 Use the Navigation button to select No option to disable DHCP, or select the Yes option to enable DHCP.

Set IP Address Field

Procedure
Step 1 Set the DHCP option to No.
Step 2 Scroll to the IP Address option, press Select, and then enter a new IP Address.
Step 3
Press Select to confirm.
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
42
Description
Primary Trivial File Transfer Protocol (TFTP)
server used by the phone. If you are not using
DHCP in your network and you want to change
this server, you must use the TFTP Server 1 option.
If you set the Alternate TFTP option to yes, you
must enter a non-zero value for the TFTP Server 1
option.
Optional backup TFTP server that the phone uses
if the primary TFTP server is unavailable.
Releases the IP address assigned by DHCP.
Cisco Unified IP Phone Settings
To Change
See Set TFTP Server 1 Field,
on page 44.
See Set TFTP Server 2 Field,
on page 44.
Scroll to the DHCP Address
Released option and press
Select, then select Yes to release
the DHCP Address.