Phone Setup; Identify Phone; Set Up Phone Fields - Cisco 3905 Administration Manual

Basic Phone Administration Steps
• Password and Confirm Password: Enter five or more alphanumeric or special characters for the end user
• Last Name: Enter the end user last name. You may use the following special characters: =, +, <, >, #, ;,
• Telephone Number: Enter the primary directory number for the end user. End users can have multiple
Step 4 Click Save.
Step 5
Proceed to the section

Phone Setup

To configure the phone, you identify the phone and then configure the fields using the following procedures.

Identify Phone

To identify the user's phone model and protocol, perform these steps:
Procedure
Step 1 From Cisco Unified Communications Manager administration, choose Device > Phone.
Step 2
Click Add New.
Step 3 Select the user's phone model from the Phone Type drop-down list, then click Next.
The Phone Configuration window appears.
Step 4 Proceed to

Set Up Phone Fields

On the Phone Configuration window, you can use the default values for most of the fields.
To configure the required fields and some key additional fields, perform these steps:
Example: johndoe
password. You may use the following special characters: =, +, <, >, #, ;, \, , "", and blank spaces.
\, , "", and blank spaces.
Example: doe
lines on their phones.
Example: 26640 (John Doe's internal company telephone number)
Phone Setup, on page
Set Up Phone Fields, on page
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
107.
107.
Phone Setup
107