Network Setup Page - Cisco 3905 Administration Manual

Network Setup Page

Item
Host Name
Phone DN
App Load ID
Boot Load ID
Hardware Revision
Serial Number
Model Number
Message Waiting
UDI
Time
Time Zone
Date

Network Setup Page

The Network Setup on a phone web page displays network setup information and information about other
phone settings. The following table describes these items.
You can view and set many of these items from the Network Setup Menu and the Phone Information Menu
on the Cisco Unified IP Phone. For more information, see
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
66
Description
Unique, fixed name that is automatically assigned to the phone based on its MAC
address
Directory number assigned to the phone
Identifier of the firmware running on the phone
Identifier of the factory-installed load running on the phone
Revision value of the phone hardware
Unique serial number of the phone
Model number of the phone
Indicates if there is a voice message waiting on the primary line for this phone
Displays the following Cisco Unique Device Identifier (UDI) information about the
phone:
• Device Type: Indicates hardware type. For example, phone displays for all
phone models
• Device Description: Displays the name of the phone associated with the indicated
model type
• Product Identifier: Specifies the phone model
• Version Identifier: Represents the hardware version of the phone
• Serial Number: Displays the unique serial number of the phone
Time obtained from the Date/Time Group in Cisco Unified Communications Manager
to which the phone belongs
Time zone obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs
Date obtained from the Date/Time Group in Cisco Unified Communications Manager
to which the phone belongs
Cisco Unified IP Phone Settings, on page
Remote Monitoring
35.