Terminology Differences - Cisco 3905 Administration Manual

Terminology Differences

• External power supply
Determines how the phone receives power. For more information, see the
page 23
Step 2 Assemble the phone, adjust phone placement, and connect the network cable.
This step locates and installs the phone in the network. For more information, see
Phone, on page 33
Step 3 Monitor the phone startup process. This step associates directory numbers to the phone and verifies that phone
is configured properly.
For more information, see the
Step 4 If you are configuring the network settings on the phone, you can set up an IP address for the phone by either
using DHCP or manually entering an IP address.
• Using DHCP - Verify that DHCP is enabled. You can set an alternate TFTP by entering the IP address
• Without DHCP - Verify that DHCP is disabled. You must then configure the IP address, subnet mask,
For more information, see the
page
Step 5
Set up security on the phone. This step provides protection against data tampering threats and identity theft
of phones.
For more information, see the
Step 6
Make calls with the Cisco Unified IP Phone. This step verifies that the phone and features work correctly.
For more information, see Cisco Unified SIP Phone 3905 User Guide for Cisco Unified Communications
Manager 9.0 (SIP).
Step 7 Provide information to end users about how to use their phones and how to configure their phone options.
This step ensures that users have adequate information to successfully use their Cisco Unified IP Phones.
For more information, see
Terminology Differences
The following table highlights some of the important differences in terminology that is used in these documents:
• Cisco Unified SIP Phone 3905 User Guide for Cisco Unified Communications Manager 9.0(SIP)
• Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 9.0
• Cisco Unified Communications Manager Administration Guide
• Cisco Unified Communications Manager System Guide
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
18
and Footstand, on page
Phone Startup Verification, on page
for the TFTP.
Consult with the network administrator to determine whether you need to assign an alternative
Note
TFTP server instead of using the TFTP server assigned by DHCP.
TFTP server, and default router locally.
Network Settings Without DHCP, on page 34
35.
Security Configuration Menu, on page
Internal Support Web Site, on page 97
(SIP)
5.
34.
44.
Cisco Unified IP Phone
Cisco Unified IP Phone Power, on
Install Cisco Unified IP
and Configuration Menus, on