Password Protection; Apply Phone Password - Cisco 3905 Administration Manual

Password Protection

You can control whether a phone has access to the Settings menu or to options on this menu by using the
Note
Settings Access field in the Cisco Unified CM Administration Phone Configuration window. The Settings
Access field accepts these values:
• Enabled: Allows access to the Settings menu.
• Disabled: Prevents access to the Settings menu.
• Restricted: Allows access to the User Preferences menu and allows volume changes to be saved.
If you cannot access an option on the Administrator Settings menu, check the Settings Access field.
Procedure
Step 1 Press Applications.
Step 2 Select Admin Settings.
Step 3 Enter the password and then press Select. The Admin Settings password is configured in the Local Phone
Unlock Password parameter in the Common Phone Profile Configuration on Cisco Unified CM Administration.
Note
Step 4 Perform one of these actions to display the desired menu:
• Use the navigation bar to select the desired menu and then press Select.
• Use the keypad on the phone to enter the number that corresponds to the menu.
Step 5
To display a submenu repeat Step 4.
Step 6
To exit a menu, press Back
Related Topics
Password Protection, on page 36
Value Input Guidelines, on page 37
Network Setup Menu, on page 37
IPv4 Setup Menu Options, on page 41
Password Protection
You can apply a password to the phone so that no changes can be made to the administrative options on the
phone without password entry on the Administrator Settings phone screen.

Apply Phone Password

To apply a password to the phone, perform these steps:
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
36
Prevents access to other options on the Settings menu.
Users can access the Admin Settings without entering a password when the Local Phone Unlock
Password parameter is not configured
.
Cisco Unified IP Phone Settings