Basic Phone Administration Steps; Example User Information - Cisco 3905 Administration Manual

Basic Phone Administration Steps

This appendix provides minimum, basic configuration steps for you to do the following:
• Add a new user to Cisco Unified Communications Manager Administration
• Configure a new phone for that user
• Associate that user to that phone
• Complete other basic end-user configuration tasks
The procedures provide one method for performing these tasks and are not the only way to perform these
tasks. They are a streamlined approach to get a new user and corresponding phone running on the system.
These procedures are designed to be used on a mature Cisco Unified Communications Manager system
where calling search spaces, partitions, and other complicated configuration have already been done and are
in place for existing users.
This section contains these topics:
•
•
•
•

Example User Information

In the procedures that follow, examples are given when possible to illustrate some of the steps. Sample user
and phone information used throughout these procedures includes:
• User's Name: John Doe
• User ID: johndoe
• Phone model: 3905
• Protocol: SIP
• MAC address listed on phone: 00127F576611
Example User Information, page 105
Cisco Unified Communications Manager User Addition, page 106
Phone Setup, page 107
Perform Final End User Configuration Steps, page 110
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
D
A P P E N D I X
105