Set Pc Port Setup Field; Ipv4 Setup Menu Options - Cisco 3905 Administration Manual

Cisco Unified IP Phone Settings

Set PC Port Setup Field

Procedure
Step 1
Unlock network setup options.
Step 2 Scroll to the PC Port Setup option and then press Select.
Step 3 Scroll to the setting that you want and then press Select.

IPv4 Setup Menu Options

The IPv4 Setup menu is a submenu of the Network Setup menu. To reach the IPv4 Setup menu, select the
IPv4 option on the Network Setup menu.
The following table describes the IPv4 Setup menu options.
Table 7: IPv4 Setup Menu Options
Option
DHCP
IP Address
Subnet Mask
Default Router 1
DNS Server 1
Alternate TFTP
Description
Indicates whether the phone has DHCP enabled or
disabled.
When DHCP is enabled, the DHCP server assigns
the phone an IP address. When DHCP is disabled,
the administrator must manually assign an IP
address to the phone.
Internet Protocol (IP) address of the phone.
If you assign an IP address with this option, you
must also assign a subnet mask and default router.
See the Subnet Mask and Default Router options
in this table.
Subnet mask used by the phone.
Default router used by the phone (Default Router
1).
Primary Domain Name System (DNS) server (DNS
Server 1) and optional backup DNS servers (DNS
Server 2-5) used by the phone.
Indicates whether the phone is using an alternative
TFTP server.
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
Set PC Port Setup Field
To Change
See Set DHCP Field, on page
42.
See Set IP Address Field, on
page 42.
See Set Subnet Mask Field, on
page 43.
See Set Default Router Field,
on page 43.
See Set DNS Server Field, on
page 43.
See Set Alternate TFTP Field,
on page 43.
41