Follow Rest - Grizzly G4791 Owner's Manual

Follow Rest

Figure 45.
Tools Needed
To use the follow rest:
1.
2.
3.
4.
5.
Figure 45
Qty
Tip: To further avoid deflection of the
workpiece during setup, use the method
shown in Figure 46. The test indicator is
set directly opposite the brass fingers on the
workpiece, then the brass finger is moved
into the workpiece until the dial on the indi-
cator begins to move. Back the finger away
from the workpiece until the indicator dial
stops moving. Adjust each of the fingers in
the same way.
Figure 46.