Grizzly G4791 Owner's Manual page 48

Configure Change Gears
Tools Needed
To configure the change gears:
1.
2.
Figure 60
Note: Your lathe/mill is shipped with the fol-
lowing change gears installed:
A
B
C
D
B
A
D
Figure 60.
3.
Figure 58 Page 44
Qty
C
Column D
4.
Note: Before you install or store the gears,
thoroughly clean all components with a stiff
brush and mild solvent, dry them, then brush
a thin film of ISO 68 oil or equivalent.
Change Gear "A"
a.
b.
A
c. B
The V-belt, change gears,
and pulleys represent
a serious entanglement
hazard when the lathe
is running. Always have
the change gear cabinet
door closed and secure
when the machine is
connected to power.
B
A