Grizzly G4791 Owner's Manual page 67

3.
Note: Turning the screws clockwise will
tighten the gib, and turning them counter-
clockwise will loosen the gib.
4.
5.
Steps 2–4
Tailstock Gib
Tools Needed
To adjust the tailstock gib:
1.
Note: Turning the set screws clockwise will
tighten the gib, and turning them counter-
clockwise will loosen the gib.
Figure 104.
Qty
Tools Needed
To adjust the table backlash:
Figure 104
1.
2.
Figure 105.
3.
Adjusting Table
Backlash
Qty
Figure 105