SECTION 7: MAINTENANCE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Schedule
Daily Check:
Every 6–8 Hours of Operation:
After First Three Months:
Semi-Annually:
57
Annually:
Page 54
Page 56
Page 59
Page
Page 56
Cleaning &
Protecting
DO NOT use compressed air to blow away
chips from the lathe to avoid the risk of
flying metal debris injuring yourself or oth-
ers, or driving the chips deep into the lathe
mechanisms resulting in damage or prema-
ture wear.
ACCESSORIES
Page 50