Grizzly G4791 Owner's Manual page 47

A.
B.
1/LO
Figure 59
Figure 59.
C.
2/HI
D.
E.
F.
G.
metric
inch
Feed Rate Change Lever
2/HI
Figure 59
OFF
Note: The illustrations provided at the top of the
B and C columns of the feed rate configuration
chart show the handle of the range lever pointing
to "I" or "II", which appears opposite of the actual
configuration of the lever. If requiring the "I" posi-
tion as directed in the chart, point the arrow on the
lever hub to 1/LO (low). Conversely, if the chart
directs you to select the "II" position, point the
arrow at 2/HI (high).
NOTICE
Attempting to move the feed rate range
lever when the lathe is running will damage
the internal gears of the power feed mecha-
nism and will void the warranty. NEVER
attempt to move the feed rate range lever
when the lathe is running.
1/LO
0/N