Cisco 6509 - Catalyst Chassis Switch Installation Manual page 59

Chapter 1 Product Overview
Table 1-13 Catalyst 6509-E Switch Features (continued)
Feature
Fan Tray
Power Supply
OL-5781-04
Description
Supports one hot-swappable fan tray. These fan tray models are
•
supported:
WS-C6509-E-FAN—846 CFM
–
Note You must install a 2500 W or higher capacity power supply in
the chassis to power the high-speed fan tray. The 2500 W power
supply can be powered from either 120 VAC or 220 VAC.
The fan tray contains nine individual fans. The individual fans
Note
are not field replaceable. You must replace the fan tray.
Fan tray STATUS LED
•
Red—One or more individual fans have failed.
–
– Green—Fan tray is operating normally.
Supports one or two power supplies. The following models are
•
supported:
WS-CAC-2500W (2500 W AC-input power supply).
–
WS-CDC-2500W (2500 W DC-input power supply).
–
WS-CAC-3000W (3000 W AC-input power supply).
–
WS-CAC-4000W-US (4000 W AC-input power supply).
–
WS-CAC-4000W-INT (4000 W AC-input power supply).
–
PWR-4000-DC (4000 W DC-input power supply).
–
– WS-CAC-6000W (6000 W AC-input power supply).
• Installed power supplies can be of different wattage ratings. Installed
power supplies can also be both AC-input, both DC-input, or one
AC-input and one DC-input. Power supplies can be configured in either
redundant or non-redundant mode.
All Catalyst 6500 series AC-input power supplies require single-phase
•
source AC. Source AC can be out of phase between multiple power
supplies or multiple AC-power plugs on the same power supply because
all AC power supply inputs are isolated.
Catalyst 6500 Series Switches Installation Guide
Catalyst 6509-E Switch
1-35