1400 W Ac-Input Power Supply - Cisco 6509 - Catalyst Chassis Switch Installation Manual

1400 W AC-Input Power Supply

1400 W AC-Input Power Supply
The 1400 W AC-input power supply (PWR-1400-AC) can be installed in the Catalyst 6503 switch and
Catalyst 6503-E switch chassis only. Due to form factor differences, the 1400 W AC-input power supply
cannot be installed in any other Catalyst 6500 series switch chassis.
The 1400 W power supplies (see
modules (PEMs), located on the front of the Catalyst 6503 and Catalyst 6503-E switch chassis, to
connect the site power source to the power supply located in the back of the chassis.
The AC-input PEM (PEM-20A-AC+) (shown in
front of the router chassis to connect the site power source to the power supply.
The PEMs have an illuminated power switch, current protection, surge and EMI suppression, and filtering
functions.
Figure A-7
Figure A-8
AC power
Captive installation screws
Catalyst 6500 Series Switches Installation Guide
A-18
1400 W AC-Input Power Supply (PWR-1400-AC)
Captive installation screws
1400 W AC-Input PEM (PEM-20A-AC+)
IEC 60320 C19 connector
switch
Figure A-7) do not connect directly to source AC but use power entry
Figure A-8) provides an input power connection on the
Status LEDs
Appendix A Power Supply Specifications
OL-5781-04