Catalyst 6503-E Switch
Catalyst 6503-E Switch
The Catalyst 6503-E switch is a 3-slot horizontal chassis.
Catalyst 6503-E switch chassis.
Figure 1-3
Table 1-3
Catalyst 6503-E Switch Features
Feature
Chassis
Supervisor Engine
Modules
Backplane Bandwidth
Clock and VTT module
Catalyst 6500 Series Switches Installation Guide
1-8
Table 1-4
shows the front view and
Figure 1-4
Description
Three horizontal slots. Slots are numbered from 1 (top) to 3 (bottom).
•
Supports Supervisor Engine 1, Supervisor Engine 2, Supervisor
•
Engine 32, and Supervisor Engine 720.
Supervisor engines are installed in slot 1 and slot 2.
–
The uplink ports are fully functional on the redundant supervisor engine
•
in standby mode.
Note
Redundant supervisor engines must be configured identically.
Supports up to two Catalyst 6500 series modules.
•
•
Does not support the WS-C6500-SFM and WS-X6500-SFM2 Switch
Fabric Modules.
Some Catalyst 6500 series modules may:
•
–
Not be supported
Require that you install a Supervisor Engine 720
–
Have chassis slot restrictions
–
Require a specific software release level
–
Check your software release notes for specific information.
32 GBps shared bus.
•
720 GBps switch fabric.
•
One replaceable clock module (CLK-7600=) provides clocking signals
•
to the EOBC channel and the switching bus.
Non-replaceable voltage termination (VTT) module provides reference
•
voltage for bus signals.
Table 1-3
lists the specifications of the Catalyst 6503-E switch chassis.
shows the rear view of the Catalyst 6503-E switch.
Chapter 1
Product Overview
lists the features of the
OL-5781-04