Topology View - Cisco 2950 - Catalyst Switch Configuration Manual

Displaying CMS
Note Figure 4-7
for a list of switches that can be members of a cluster with a Catalyst 2950 or a Catalyst 2955 switch as
the command switch.

Topology View

When CMS is launched from a command switch, the Topology view appears by default.
When you click the topology button on the tool bar, the Topology view displays the command switch
(shown by the *CMD* label) and the devices that are connected to it, as shown in
right-click on a switch or link icon to display a menu for that icon.
Figure 4-8
1
2
Note Figure 4-8
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
4-14
shows a cluster with a Catalyst 3550 switch as the command switch. Refer to the release notes
Topology View and Device Popup Menus
1
Link popup menu
Command switch
shows multiple popup menus. Only one popup menu at a time appears in the CMS.
2 3
3
Command switch popup menu
4
Cluster member popup menu
Chapter 4 Getting Started with CMS
Figure 4-8. You can
4
78-11380-10