Cisco 2950 - Catalyst Switch Configuration Manual page 89

Chapter 4 Getting Started with CMS
The switch home page appears, as shown in
Figure 4-4
The switch home page has these tabs:
• Express Setup—Opens the Express Setup page
Note
• Cluster Management Suite—Launches CMS
• Tools—Accesses diagnostic and monitoring tools, such as Telnet, Extended Ping, and the show
interfaces privileged EXEC command
• Help Resources—Provides links to the Cisco website, technical documentation, and the Cisco
Technical Assistance Center (TAC)
Step 3 Click Cluster Management Suite to launch the CMS interface. The CMS Startup Report runs and
verifies that your PC or workstation can correctly run CMS.
78-11380-10
Switch Home Page
You can use Express Setup to assign an IP address to an unconfigured switch. For more
information, refer to the hardware installation guide.
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
Figure 4-4.
Displaying CMS
4-11