Cisco 2950 - Catalyst Switch Configuration Manual page 516

Configuring System Message Logging
Command
Step 3 logging trap level
Step 4
logging facility facility-type
Step 5
end
Step 6 show running-config
Step 7
copy running-config startup-config
To remove a syslog server, use the no logging host global configuration command, and specify the syslog
server IP address. To disable logging to syslog servers, enter the no logging trap global configuration
command.
Table 27-4
facilities, consult the operator's manual for your UNIX operating system.
Table 27-4 Logging Facility-Type Keywords
Facility Type Keyword
auth
cron
daemon
kern
local0-7
lpr
mail
news
sys9
sys10
sys11
sys12
sys13
sys14
syslog
user
uucp
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
27-12
Purpose
Limit messages logged to the syslog servers.
Be default, syslog servers receive informational messages and lower. See
Table 27-3 on page 27-9
Configure the syslog facility. See
facility-type keywords.
The default is local7.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
lists the UNIX system facilities supported by the software. For more information about these
Description
Authorization system
Cron facility
System daemon
Kernel
Locally defined messages
Line printer system
Mail system
USENET news
System use
System use
System use
System use
System use
System use
System log
User process
UNIX-to-UNIX copy system
Chapter 27 Configuring System Message Logging
for level keywords.
Table 27-4 on page 27-12 for
78-11380-10