Chapter 2 Using The Command-Line Interface; Management Options; Management Interface Options - Cisco 2950 - Catalyst Switch Configuration Manual

Management Options

•
•
Management Options
The switch is designed for plug-and-play operation: you only need to assign basic IP information to the
switch and connect it to the other devices in your network. If you have specific network needs, you can
configure and monitor the switch—on an individual basis or as part of a switch cluster—through its
various management interfaces.
This section discusses these topics:
•
•

Management Interface Options

You can configure and monitor individual switches and switch clusters by using these interfaces:
•
•
•
•
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
1-8
Upstream power back-off mechanism for normalization of the upstream receive power levels by
requiring the CPE devices on shorter lines to transmit at a lower power level than the CPEs on longer
lines
Support for sending LRE debugging messages to the LRE message logging process and to the
system message logging process
Management Interface Options, page 1-8
Advantages of Using CMS and Clustering Switches, page 1-9
CMS—CMS is a graphical user interface that can be launched from anywhere in your network
through a web browser such as Netscape Communicator or Microsoft Internet Explorer. CMS is
already installed on the switch. Using CMS, you can configure and monitor a standalone switch, a
specific cluster member, or an entire switch cluster. You can also display network topologies to
gather link information and display switch images to modify switch and port level settings.
For more information about CMS, see
CLI—The switch Cisco IOS CLI software is enhanced to support desktop-switching features. You
can configure and monitor the switch and switch cluster members from the CLI. You can access the
CLI either by connecting your management station directly to the switch console port or by using
Telnet or SSH from a remote management station.
For more information about the CLI, see
IE2100—Cisco Intelligence Engine 2100 Series Configuration Registrar is a network management
device that works with embedded CNS Agents in the switch software. You can automate initial
configurations and configuration updates by generating switch-specific configuration changes,
sending them to the switch, executing the configuration change, and logging the results.
For more information about IE2100, see
SNMP—SNMP provides a means to monitor and control the switch and switch cluster members.
You can manage switch configuration settings, performance, and security and collect statistics by
using SNMP management applications such as CiscoWorks2000 LAN Management Suite (LMS)
and HP OpenView.
You can manage the switch from an SNMP-compatible management station that is running
platforms such as HP OpenView or SunNet Manager. The switch supports a comprehensive set of
MIB extensions and four RMON groups.
For more information about using SNMP, see the
Chapter 4, "Getting Started with CMS."
Chapter 2, "Using the Command-Line Interface."
Chapter 6, "Configuring IE2100 CNS Agents."
Chapter 28, "Configuring SNMP."
Chapter 1 Overview
78-11380-10