Displaying The Ssh Configuration And Status - Cisco 2950 - Catalyst Switch Configuration Manual

Chapter 9 Configuring Switch-Based Authentication

Displaying the SSH Configuration and Status

To display the SSH server configuration and status, use one or more of the privileged EXEC commands
in Table
Table 9-2
Command
show ip ssh
show ssh
For more information about these commands, refer to the "Secure Shell Commands" section in the
"Other Security Features" chapter of the Cisco IOS Security Command Reference, Cisco IOS
Release 12.2, at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_r/fothercr/
srfssh.htm.
78-11380-10
9-2:
Commands for Displaying the SSH Server Configuration and Status
Purpose
Shows the version and configuration information for the SSH server.
Shows the status of the SSH server.
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
Configuring the Switch for Secure Shell
9-37