Downloading An Image File By Using Tftp - Cisco 2950 - Catalyst Switch Configuration Manual

Working with Software Images
•
•
•

Downloading an Image File By Using TFTP

You can download a new image file and replace the current image or keep the current image.
Beginning in privileged EXEC mode, follow Steps 1 through 3 to download a new image from a TFTP
server and overwrite the existing image. To keep the current image, skip Step 3.
Command
Step 1
Step 2
Step 3 archive download-sw /overwrite /reload
tftp:[[//location]/directory]/image-name.tar
Step 4
archive download-sw /leave-old-sw /reload
tftp:[[//location]/directory]/image-name.tar
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
B-22
Appendix B
For download operations, ensure that the permissions on the file are set correctly. The permission
on the file should be world-read.
Before uploading the image file, you might need to create an empty file on the TFTP server. To
create an empty file, enter the touch filename command, where filename is the name of the file you
will use when uploading the image to the server.
During upload operations, if you are overwriting an existing file (including an empty file, if you had
to create one) on the server, ensure that the permissions on the file are set correctly. Permissions on
the file should be world-write.
Working with the Cisco IOS File System, Configuration Files, and Software Images
Purpose
Copy the image to the appropriate TFTP directory on the
workstation. Make sure that the TFTP server is properly
configured; see the "Preparing to Download or Upload an Image
File By Using TFTP" section on page
Log into the switch through the console port or a Telnet session.
Download the image file from the TFTP server to the switch, and
overwrite the current image.
The /overwrite option overwrites the software image in flash
•
with the downloaded image only if the version of the image
being downloaded is the same as the existing copy in flash
memory.
• The /reload option reloads the system after downloading the
image unless the configuration has been changed and not been
saved.
• For //location, specify the IP address of the TFTP server.
• For /directory/image-name.tar, specify the directory
(optional) and the image to download. Directory and image
names are case sensitive.
Download the image file from the TFTP server to the switch, and
keep the current image.
• The /leave-old-sw option keeps the old software version after
a download.
• The /reload option reloads the system after downloading the
image unless the configuration has been changed and not been
saved.
• For //location, specify the IP address of the TFTP server.
• For /directory/image-name.tar, specify the directory
(optional) and the image to download. Directory and image
names are case sensitive.
B-21.
78-11380-10