Adjusting The Handset Rest - Cisco 6945 User Manual

Hide thumbs Also See for 6945:

Table of Contents

Overview

Adjusting the Handset Rest

You can adjust the handset rest of a wall-mounted phone so that the receiver does not slip out of the cradle.

Procedure

Set the handset aside and pull the square plastic tab from the handset rest.

Step 1

Rotate the tab halfway (180 degrees).

Step 2

Hold the tab between two fingers, with the small notches (in the corners) facing you.

Step 3

Make sure the tab lines up evenly with the slot in the cradle.

Step 4

Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the

Step 5

handset to the handset rest.

OL-24413-01

Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)

Adjusting the Handset Rest

Table of Contents