Cisco AIR-PCM340 Installation And Configuration Manual page 74

Configuring Your Client Adapter
Table 5-3
Parameter
Network Type
Network
Click Apply at the bottom of the System Parameters screen to save any changes you have made.
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
5-10
System Parameters (continued)
Description
Specifies the type of network in which your client adapter is installed.
Default: Infrastructure Mode
Network Type
Ad Hoc Mode
Infrastructure Mode
Specifies the network configuration in which your client adapter is used.
Default: Office Network
Note Select Office Network if your client adapter will be used in an
enterprise network. If you are planning to use your client adapter in a
home network, go to the "Setting Home Networking Parameters"
section on page 5-21.
Chapter 5 Advanced Configuration on Mac OS 9.x
Description
Often referred to as peer to peer. Used to set up a
small network between two or more devices. For
example, an ad hoc network could be set up
between computers in a conference room so users
can share information in a meeting.
Used to set up a connection to a wired Ethernet
network (through an access point).
OL-1377-01