Cisco AIR-PCM340 Installation And Configuration Manual page 123

Chapter 7 Performing Diagnostics
Table 7-1
Client Adapter Setting
Current Power Level
Channel (Frequency)
Network Type
Power Save Mode
Antenna Selection
OL-1377-01
Client Adapter Status (continued)
Description
The power level at which your client adapter is currently transmitting.
The maximum level is dependent upon the radio installed in your client
adapter and your country's regulatory agency.
Value: 1, 5, 15, 20, 30, 50, or 100 mW (30 mW is the maximum power
Note
Note
The frequency that your client adapter is currently using as the channel
for communications.
Value: Dependent on regulatory domain
Note
The type of network in which your client adapter is being used.
Value: Infrastructure, Ad Hoc, or Unknown
Note
The client adapter's current power consumption setting.
Value: CAM, Fast Power Save, Max Power Save, or Unknown
Note
The antenna mode that your client adapter is currently using.
Value: Antennas 1 and 2, Antenna 1 Only, Antenna 2 Only
Note
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
level supported by 340 series client adapters)
15 mW is supported by 340 series client adapters only, and
20 mW is supported by 350 series client adapters only.
Refer to the Transmit Power parameter in
information on setting the client adapter's power level.
Refer to the Channel parameter in
on selecting the frequency for your client adapter.
Refer to the Network Type parameter in
information on setting the network type.
Refer to the Power Save Mode parameter in
information on setting the client adapter's power save mode.
(Antenna 1 Only is the only option available for PCI client
adapters)
Refer to the Transmit Antenna Mode and Receive Antenna
Mode parameters in Table 5-5
on setting the antenna mode.
Diagnostic Tools for Mac OS 9.x
Table 5-4 for
Table 5-4 for information
Table 5-3 for
Table 5-3 for
and Table 5-6 for information
7-5