Introduction To The Client Utility; Opening The Client Utility For Mac Os 9.X - Cisco AIR-PCM340 Installation And Configuration Manual

Chapter 1 Overview

Introduction to the Client Utility

The client utility allows you to load new firmware, enable security features, configure your client
adapter, and perform user-level diagnostics. The latest client utility software package for both the Mac
OS 9.x and the Mac OS X operating systems is available from Cisco's web site.
Note The latest Macintosh software package on CCO contains the driver and client utility for both the Mac
OS 9.x and the Mac OS X operating systems.
To obtain the latest driver and client utility from the Cisco Web site, follow these steps:
Use your web browser to access the following URL:
Step 1
Step 2 Click on the latest software file (MACOSInstallv2x.sit) for both the Mac OS 9x and Mac OS X operating
systems. The 2x identifies the software package version number.
Step 3 Read and accept the terms and conditions of the Software License Agreement.
Step 4 Select the Cisco server from which you wish to download the file.
Step 5 Save the file to your hard drive then exit the web browser.
For installation instructions, refer to
Adapter."

Opening the Client Utility for Mac OS 9.x

To open the client utility on a Mac OS 9.x operating system, follow the steps below:
Double-click the Macintosh hard disk icon on the desktop.
Step 1
Double-click the Cisco pcm3x0 Folder icon. If you selected a location other than the default (the Cisco
Step 2
pcm3x0 Folder) during the installation process, select the folder in which the utility was installed.
Double-click the pcm3x0PPC icon. The computer searches for the client adapter. After the adapter is
Step 3
found, the Basic Properties screen appears.
OL-1377-01
http://www.cisco.com/pcgi-bin/tablebuild.pl/aironet-utils-mac.
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
Chapter 3, "Installing the Driver, Client Utility, and Client
Introduction to the Client Utility
1-7