Verifying A Successful Installation And Configuration On Mac Os X - Cisco AIR-PCM340 Installation And Configuration Manual

Configuring the Client Adapter

Verifying a Successful Installation and Configuration on Mac OS X

The installation and configuration of your client adapter is successful when your client card is associated
and authenticated to an access point. To verify a successful configuration, perform the following steps:
On the Finder main menu bar, click Go and select Applications.
Step 1
Double-click Aironet Client Utility on the Applications screen.
Step 2
If the Aironet Client Utility icon is not on the Applications screen or the client utility screen does not
appear, verify that your Macintosh is running Mac OS X and reinstall the client utility and driver. If you
continue to have problems refer to the
When the client utility screen appears, check the status line on the bottom of the screen. The status line
Step 3
should indicate that the radio is associated to an access point, the access point name, and the IP address.
The status line should be similar to: Radio is associated AP:'AP340-3836b7' IP: 10.0.0.1.
If the client utility screen appears but your client card is not associated, verify your settings match with
the access point. If you are unable to determine your problem, refer to the
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
3-14
Chapter 3 Installing the Driver, Client Utility, and Client Adapter
"Obtaining Technical Assistance" section on page xiv.
Chapter 9, "Troubleshooting.".
OL-1377-01