Cisco AIR-PCM340 Installation And Configuration Manual page 185

Appendix E Positioning Wireless Devices
Table E-2
Table E-2
Parameter
Firmware Version
Channel
World Mode Carrier Set
Product Name
MAC Address
Data Rate
Packets Transmitted
Packets Received
Total Receive Errors
Signal Strength
Signal Quality
Network Name
Name
MAC Address
OL-1377-01
describes the parameters on the status screen.
Client Adapter Status Screen Parameters
Description
The version of the radio firmware that is currently running on your
client adapter.
Specifies which frequency channel your client adapter is using to
communicate with the access point.
When world mode is enabled and your client adapter has associated to
an access point, this is the channel set adopted by the adapter from the
access point.
Identifies the type of client adapter you are using.
Value:340 Series, 350 Series, or 4800 Series
The MAC address assigned to your client adapter at the factory
The rate at which your client adapter is currently transmitting data
packets.
The number of packets that have been transmitted successfully.
The number of packets that have been received successfully.
The total number of errors on receive packets.
The signal strength for received packets. The longer the bar graph is, the
stronger the signal.
The signal quality for received packets. The longer the bar graph is, the
better the signal quality.
The network name or SSID of your wireless network.
The name of the access point to which your client adapter is associated.
It is shown only if the access point was configured with a name and you
are in infrastructure mode.
The MAC address of the access point or wireless device to which your
client adapter is associated.
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
Site Survey
E-7