Chapter 4
Security Features
Selecting an Existing WEP Key
If you want an existing WEP key to be used with your client adapter, follow the instructions below.
Step 1
Select WEP Keys from the Edit pull-down menu (see
Step 2
Enter the correct password and click OK.
Step 3
The WEP Keys screen appears (see
Figure 4-4
A checkmark appears in the 40-bit or 128-bit column for all existing WEP keys.
Note
Click Transmit Key next to the key you want to use to transmit packets.
Step 4
Click OK.
Step 5
To enable WEP, follow the instructions in the
OL-1377-01
WEP Keys Screen
To protect WEP key security, the codes for existing WEP keys do not appear on the
screen.
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
Figure
4-1).
Figure
4-4).
"Enabling WEP" section on page
Security Options for Mac OS 9.x
4-15.
4-7