Removing The Client Adapter; Removing A Pc Card - Cisco AIR-PCM340 Installation And Configuration Manual

Removing the Client Adapter

Step 12 If the uninstall process is not successful in Mac OS 9.x, manually remove the following files and folders
by dragging them to the Trash icon:
a.
b.
c.
d.
To remove your client adapter, follow the instructions in the
Note
Removing the Client Adapter
Follow the instructions below whenever you need to remove the client adapter from your computer.

Removing a PC Card

To remove a PC card after it is successfully installed and configured (such as when your laptop is to be
transported), completely shut down your computer and pull the card directly out of the PC card slot. You
can remove the PC card while the system is running, provided the card is not being used (that is, the
client utility is not running and the card is not selected in the AppleTalk and TCP/IP control panels).
When the PC card is reinserted and the computer is rebooted, your connection to the network should be
re-established.
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
8-6
Located in the root folder
– Remove the Cisco pcm340 folder
Located in the Extensions sub folder of the Systems folder:
– Remove the pcm340 file
Remove the pcm340Enabler file
–
Remove the pcm350Enabler file
–
Remove the pcm340PCI file
–
Remove the pcm350PCI file
–
Located in the Preferences sub folder of the Systems folder:
– Remove the pcm340 preferences folder
Located in the Help sub folder of the Systems folder
Remove the pcm340PPC help folder
–
Chapter 8 Routine Procedures
Removing the Client Adapter section.
OL-1377-01