Cisco AIR-PCM340 Installation And Configuration Manual page 103

Chapter 6 Advanced Configuration on Mac OS X
Step 4 Select Download firmware from the File pull-down menu (see Figure 6-5). The file location screen
appears.
Figure 6-5
Step 5 Click the up and down arrows on the right of the From field and select the location (volume and folder)
of the new radio firmware file on your hard disk.
Step 6 Click the new radio firmware image file (*.img); see Figure 6-6.
Figure 6-6
Click the Open button. A dialog box appears indicating the progress of the download. The selected
Step 7
image is loaded into the client adapter's Flash memory.
Click OK when a message appears indicating the firmware download was successful.
Step 8
OL-1377-01
File Pull-Down Menu
Firmware File Location Screen
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
Using the Client Utility on Mac OS X
6-9