Appendix B Using The Offline Diagnostic Monitor Menu; Accessing The Offline Dm Main Menu; Using The Boot Configuration Menu - Cisco 11503 - CSS Content Services Switch Administration Manual

Accessing the Offline DM Main Menu

Cisco Content Services Switch Administration Guide
B-2
This appendix contains the following major sections:
• Accessing the Offline DM Main Menu

Using the Boot Configuration Menu

•
Displaying the Boot Configuration
•
Using the Advanced Options
•
To access the Offline DM Main menu:
Connect a console to the console port on the CSS. Configure the console with
1.
the following default values: 9600 baud, no parity, 8 data bits, 1 stop bit, and
flow control set to none.
If accessing the Offline DM Main menu from a terminal server, configure the
2.
client application to display 24 lines to enable the Offline DM Main menu to
display properly.
Power on the CSS. After the CSS begins to boot (approximately 15 seconds),
3.
it displays the following message (for approximately 5 seconds):
Would you like to access the Offline Diagnostic Monitor
menu?(y<cr>)
At this point in the boot sequence, you may either:
Take no action (or press n) and let the CSS continue booting
•
automatically with the default boot configuration.
Press y, then press Enter to halt the boot process and display the Offline
•
DM Main menu.
The Offline DM Main menu appears:
MAIN MENU
Enter a menu number:
1* Set Boot Configuration
2. Show Boot Configuration
3* Advanced Options
4. Reboot System
An asterisk (*) next to a menu option indicates that the option contains a submenu.
Appendix B Using the Offline Diagnostic Monitor Menu
OL-5647-02