Configuring The Passive Scm Primary Configuration Path; Configuring The Passive Scm Secondary Boot File - Cisco 11503 - CSS Content Services Switch Administration Manual
Content services switch
Hide thumbs
Also See for 11503 - CSS Content Services Switch:
- Configuration manual (250 pages) ,
- Hardware installation manual (184 pages) ,
- Getting started manual (142 pages)
Table of Contents
Advertisement
Chapter 2
Specifying the CSS Boot Configuration
Configuring the Passive SCM Primary Configuration Path
Configuring the Passive SCM Secondary Boot File
OL-5647-02
For example:
(config-boot)# passive primary boot-type boot-via-ftp arecord
To remove the primary boot type from the passive SCM, enter:
(config-boot)# no passive primary boot-type
An alternate configuration path allows multiple CSSs to use the same boot image
while keeping their configuration information in separate directories. Use the
passive primary config-path command to specify an alternate path to a network
configuration for a passive SCM network boot method. Note that the CSS must be
able to access the configuration path through an FTP server as defined through the
FTP record for the network boot method.
When using an alternate configuration path, make sure the path leads to a
directory containing the script, log, and information subdirectories, and the
startup-config file. These subdirectories must contain the files in the
corresponding subdirectories in the unzipped boot image. First, create these
subdirectories on the FTP server, then copy the files from the boot image to the
subdirectories.
Enter the configuration path for network configuration. Enter an unquoted text
string with no spaces and a maximum of 64 characters. For example:
(config-boot)# passive primary config-path c:/bootdir/
To remove the primary network configuration path, enter:
(config-boot)# no passive primary config-path
Use the passive secondary boot-file command to specify the secondary boot
image for the passive SCM. Enter the name of the boot file for the primary boot
image as an unquoted text string with no spaces and a maximum of 64 characters.
To display a list of boot filenames, enter passive secondary boot-file ?. For
example:
(config-boot)# passive secondary boot-file ap0720001
Configuring a Boot Configuration Record for the Passive SCM
Cisco Content Services Switch Administration Guide
2-13
Advertisement
Table of Contents
