Rmon History Configuration Quick Start; Table 6-3 Rmon History Configuration Quick Start - Cisco 11503 - CSS Content Services Switch Administration Manual

Configuring an RMON History

RMON History Configuration Quick Start

Cisco Content Services Switch Administration Guide
6-22
This section includes the following topics:
• RMON History Configuration Quick Start
Creating an Index for an RMON History
•
Deleting an RMON History Index
•
Setting the RMON History Attributes
•
Activating an RMON History Entry
•
Table 6-3 provides a quick overview of the steps required to configure the
attributes for an RMON history. Each step includes the CLI command required to
complete the task. For a complete description of each feature and all the options
associated with the CLI command, see the sections following
Table 6-3 RMON History Configuration Quick Start
Steps and Possible Settings
Create an RMON history from global configuration mode. Enter an integer
1.
from 1 to 65535.
(config)# rmon-history 5
Create History <5>, [y/n]:y
Assign the owner who defined and is using the history resources. Enter a
2.
maximum of 32 characters.
(config-rmonhistory[5])# owner "Boston_Tech_Lab"
3. Define the data source object for the Ethernet port. The port is identified by
an ifIndex data object identifier.
(config-rmonhistory[5])# data-source ifIndex.3
Define the time interval for the history. Enter a number from 1 to 3600
4.
seconds. The default is 1800 seconds.
(config-rmonhistory[5])# interval 60
Chapter 6 Configuring Remote Monitoring (RMON)
Table 6-3.
OL-5647-02