Configuring An Rmon Event; Rmon Event Configuration Quick Start - Cisco 11503 - CSS Content Services Switch Administration Manual

Configuring an RMON Event

Configuring an RMON Event

RMON Event Configuration Quick Start

Cisco Content Services Switch Administration Guide
6-4
An RMON event is the action that occurs when an associated RMON alarm is
triggered. When an alarm event occurs, it can be configured to generate a log
event, a trap to an SNMP network management station, or both. For information
on viewing alarm events in log files, see the
section. Refer to Chapter 5, Configuring Simple Network Management Protocol
(SNMP), for information on configuring SNMP on your CSS.
The following sections describe how to configure an RMON event.
RMON Event Configuration Quick Start
•
Creating an Index for an RMON Event
•
• Deleting an RMON Event Index
Setting the RMON Event Attributes
•
Activating an RMON Event
•
Suspending an RMON Alarm
•
Table 6-1 provides a quick overview of the steps required to configure the
attributes for an RMON event. Each step includes the CLI command required to
complete the task. For a complete description of each feature and all the options
associated with the CLI command, see the sections following
information on configuring an alarm and associating this event to an alarm, see
the "Configuring an RMON Alarm"
Chapter 6 Configuring Remote Monitoring (RMON)
"Viewing Events in a Log File"
section.
Table 6-1. For
OL-5647-02