Cisco 11503 - CSS Content Services Switch Administration Manual page 360
Content services switch
Hide thumbs
Also See for 11503 - CSS Content Services Switch:
- Configuration manual (250 pages) ,
- Hardware installation manual (184 pages) ,
- Getting started manual (142 pages)
Table of Contents
Advertisement
Specifying Disk as the Primary Boot Record
Specifying Clear as the Primary Boot Record
Cisco Content Services Switch Administration Guide
B-10
Enter one of the following:
2.
•
y to copy the boot image from the FTP server to the disk. The CSS
accesses the boot image directly from the disk at the next reboot. The
CSS also changes the information in the primary boot record to Disk.
n to FTP the boot image from the FTP server at the next reboot.
•
3.
Press Enter to display the Boot Configuration menu.
Enter r to display the Offline DM Main menu.
4.
Select option 4 to reboot the CSS.
5.
When the CSS completes the current boot process, it:
Accesses the ADI file from the FTP server and unpacks (uncompresses) the
•
file
Boots the CSS using the boot image you specified
•
When you select Disk as the primary boot record, the CSS displays all boot image
versions that reside on the disk. For example:
sg0730002
sg0720104
Enter the boot image filename you wish to use at the prompt.
1.
Enter the boot image filename: sg0730002
Press Enter to display the Boot Configuration menu.
2.
Press <Enter> to continue...
Press r to display the Offline DM Main menu.
3.
Select option 4 to reboot the CSS. Upon reboot, the CSS boots up using the
4.
boot image you specified.
To use the secondary boot record information instead of the primary boot record
to boot the CSS:
Select Clear as the primary boot record.
1.
Press Enter to display the Boot Configuration menu.
2.
Appendix B
Using the Offline Diagnostic Monitor Menu
OL-5647-02
Advertisement
Table of Contents
