Copying Log Files To An Ftp Or Tftp Server; Copying Log Files To An Ftp Server - Cisco 11503 - CSS Content Services Switch Administration Manual

Chapter 4 Using the CSS Logging Features

Copying Log Files to an FTP or TFTP Server

Copying Log Files to an FTP Server

OL-5647-02
Table 4-5 Field Descriptions for the show log-state Command (continued)
Field
notice
warning
error
critical
alert
fatal
File:
Filename:
Current size:
Log to Disk
To copy log files from the CSS to a File Transfer Protocol (FTP) or Trivial File
Transfer Protocol (TFTP) server, use the copy log command. The copy log
command is available only in SuperUser mode.
This section includes the following topics:
Copying Log Files to an FTP Server
•
Copying Log Files to a TFTP Server
•
To copy a log file to an FTP server, use the copy log ftp command. Before you
copy a log file from the CSS to an FTP server, create an FTP record file containing
the FTP server IP address, username, and password. Refer to
Managing the CSS Software, for information on configuring an FTP record.
Copying Log Files to an FTP or TFTP Server
Description
Log notice messages, including errors at the warning
level
Log warning errors (default), including errors at the
error level
Log errors, including errors at the critical level
Log critical errors, including errors at the alert level
Log alert errors, including errors at the fatal level
Log fatal errors only (Quiet)
Name of the log file
Current size of the log file
Identifies whether logging to disk (Flash disk or hard
disk) is Enabled or Disabled.
Cisco Content Services Switch Administration Guide
Chapter 1,
4-23