Cisco 11503 - CSS Content Services Switch Administration Manual page 157

Chapter 4 Using the CSS Logging Features
Table 4-8
Log Message (sys.log: Subsystem
Name, Level, and Message)
circuit Subsystem
CIRCUIT-7: Circuit status
message for circuit 1023 sent to
CE 20202c01 cause code is 7
OL-5647-02
Cisco 11500 Series CSS Log Messages (continued)
Cisco Content Services Switch Administration Guide
Frequently Queried Log Messages
Cause and Resolution
Codes indicate the status of interfaces
within VLANs. The logical port cause
and command codes are as follows:
Cause
CM_CIRCUIT_CREATED
CM_IP_REGISTER
CM_IP_NOT_REGISTER
CM_IP_MODIFIED
CM_LP_STATE_CHG
CM_CIRCUIT_REMOVED
CM_LP_ADDED
CM_LP_REMOVED
CM_LP_MODIFIED
CM_LP_FAILOVER
CM_CIRCUIT_DOWN
This log message indicates that a port
has been added to a VLAN. This log
message can occur when the
association to a VLAN changes as the
port transitions from an up to a down
state.
Use the show circuit command to list
the VLANs (refer to the Cisco Content
Services Switch Routing and Bridging
Guide). Check the status of the ports of
the VLAN or determine whether the
VLAN is active.
Code
1
2
3
4
5
6
7
8
9
10
11
4-37