Cisco 11503 - CSS Content Services Switch Administration Manual page 39

Chapter 1 Managing the CSS Software
The variables for this command are as follows:
•
•
•
•
•
•
For example (using an encrypted password), to create an FTP record called
arrowrecord, enter:
# ftp-record arrowrecord 192.168.19.21 bobo password "secret"
/outgoing
To delete the FTP record arrowrecord from the CSS, enter:
# no ftp-record arrowrecord
OL-5647-02
ftp_record - The name for the FTP record file. Enter an unquoted text string
with no spaces and a maximum of 16 characters.
ip_address_or_hostname - The IP address or host name of the FTP server you
want to access. Enter an IP address in dotted-decimal notation (for example,
192.168.11.1) or a mnemonic host name (for example,
myhost.mydomain.com).
username - A valid login username on the FTP server. Enter a case-sensitive
unquoted text string with no spaces and a maximum of 16 characters.
password - The password for the valid login username on the FTP server.
Enter a case-sensitive quoted text string with no spaces and a maximum of
16 characters.
des_password - The Data Encryption Standard (DES) encrypted password for
the valid login username on the FTP server. Enter a case-sensitive unquoted
text string with no spaces and a maximum of 64 characters.
base_directory - An optional base directory for this record. Enter the base
directory name as a case-sensitive unquoted text string with no spaces and a
maximum of 64 characters.
The config-path and base directory path in the FTP record associated with a
network boot must not contain a pathname that conflicts with a non-network
drive name (for example, c: or host:).
Cisco Content Services Switch Administration Guide
Creating an FTP Record
1-5