Showing Files From A Disk; Clearing Files From A Disk - Cisco 11503 - CSS Content Services Switch Administration Manual

Chapter 1 Managing the CSS Software

Showing Files from a Disk

Clearing Files from a Disk

OL-5647-02
Use the show command to display the specified archive, log, script, or startup
configuration file stored on a specific disk in the CSS. The syntax is:
show disk_slot {log filename|script filename|archive filename|
startup-config}
The options and variables for the show command are as follows:
disk_slot - Specifies the disk location containing the file to display. The valid
•
entries are 0 (disk in slot 0) and 1 (disk in slot 1).
log filename - Displays the contents of a log (or trap log file) from the
•
specified disk.
script filename - Displays the contents of the script from the specified disk.
•
archive filename - Displays the contents of the archive filename from the
•
specified disk.
startup-config - Displays the contents of the CSS startup configuration file
•
from the specified disk.
Use the clear command to delete the specified file (startup configuration, logs,
scripts, archive file) stored on a specific disk in the CSS. This command is available
only in SuperUser mode. The syntax is:
clear disk_slot {log filename|script filename|archive filename|
startup-config}
The options and variable for the clear command are as follows:
disk_slot - Specifies the disk location containing the file to delete. Valid
•
entries are 0 (disk in slot 0) and 1 (disk in slot 1).
log filename - Deletes the specified log (or trap log file) from the disk.
•
script filename - Deletes the specified script from the disk.
•
archive filename - Deletes the specified archive filename from the disk.
•
startup-config - Deletes the CSS startup configuration file from the disk.
•
Configuring Disks in a Two-Disk CSS
Cisco Content Services Switch Administration Guide
1-23