Resetting Dos Statistics - Cisco 11503 - CSS Content Services Switch Administration Manual

Configuring Denial of Service (DoS)

Resetting DoS Statistics

Cisco Content Services Switch Administration Guide
5-28
Table 5-3 Field Descriptions for the show dos Command (continued)
Field
Maximum per second
DoS Attack Event
First Attack
Last Attack
Source/Destination
Address
Event Type
Total Attacks
To set the Denial of Service (DoS) statistics for the CSS to zero, use the zero dos
statistics command in any mode. This command sets the values of the DoS
statistics in the fields of the show dos command to zero. For more information
about the show dos command, see the
Chapter 5 Configuring Simple Network Management Protocol (SNMP)
Description
The maximum number of events per second. Use the
maximum events per second information to set SNMP
trap threshold values. The maximum number of events
per second is the maximum for each SP.
For a CSS 11506, which may have up to six SPs,
•
the maximum rate per second may be as high as
six times the value appearing in this field.
For a CSS 11503, which may have up to three SPs,
•
the maximum rate per second may be as high as
three times the value appearing in this field.
Details for each detected attack event, up to a
maximum of 50 events per SP.
The first time the attack event occurred.
The last time the attack event occurred.
The source and destination addresses for the attack
event.
The type of event.
The total number of attack occurrences for the event.
"Displaying DoS Configurations" section.
OL-5647-02