Verifying Your Easy Vpn Configuration; Configuration Example - Cisco 1812W - Integrated Services Router Wireless Configuration Manual

Verifying Your Easy VPN Configuration

Command or Action
Step 5
exit
Example:
Router(config-crypto-ezvpn)# exit
Router(config)#
Step 6
interface type number
Example:
Router(config)# interface fastethernet 0
Router(config-if)#
Step 7 crypto ipsec client ezvpn name [outside | inside]
Example:
Router(config-if)# crypto ipsec client
ezvpn ezvpnclient outside
Router(config-if)#
Step 8
exit
Example:
Router(config-crypto-ezvpn)# exit
Router(config)#
Verifying Your Easy VPN Configuration
Router# show crypto ipsec client ezvpn
Tunnel name :ezvpnclient
Inside interface list:vlan 1
Outside interface:fastethernet 0
Current State:IPSEC_ACTIVE
Last Event:SOCKET_UP
Address:8.0.0.5
Mask:255.255.255.255
Default Domain:cisco.com

Configuration Example

The following configuration example shows a portion of the configuration file for the VPN and IPSec
tunnel described in this chapter.
!
aaa new-model
!
aaa authentication login rtr-remote local
aaa authorization network rtr-remote local
aaa session-id common
!
username Cisco password 0 Cisco
Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
6-10
Chapter 6 Configuring a VPN Using Easy VPN and an IPSec Tunnel
Purpose
Returns to global configuration mode.
Enters interface configuration mode.
For routers with an ATM WAN interface,
Note
this command would be interface atm 0.
Assigns the Cisco Easy VPN remote configuration
to the WAN interface, causing the router to
automatically create the NAT or PAT and access
list configuration needed for the VPN connection.
Returns to global configuration mode.
OL-6426-02