Cisco 1812W - Integrated Services Router Wireless Configuration Manual page 182

Disaster Recovery with TFTP Download
The commands described in this section are case sensitive and must be entered exactly as shown.
Note
Required Variables
These variables must be set with these commands before you use the tftpdnld command:
Variable
IP address of the router.
Subnet mask of the router.
IP address of the default gateway of the
router.
Port number of the Fast Ethernet port used to
connect to the network.
IP address of the TFTP server from which the
software will be downloaded.
Name of the file that will be downloaded to
the router.
Optional Variables
These variables can be set with these commands before you use the tftpdnld command:
Variable
Configures how the router displays file
download progress.
0—No progress is displayed.
1—Exclamation points (!!!) are displayed to
indicate file download progress. This is the
default setting.
2—Detailed progress is displayed during the
file download process; for example:
•
•
•
•
Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
C-4
Initializing interface.
Interface link state up.
ARPing for 1.4.0.1
ARP reply for 1.4.0.1 received. MAC
address 00:00:0c:07:ac:01
Command
IP_ADDRESS= ip_address
IP_SUBNET_MASK=
ip_address
DEFAULT_GATEWAY=
ip_address
FE_PORT=fe_port_number
TFTP_SERVER= ip_address
TFTP_FILE= filename
Command
TFTP_VERBOSE= setting
Appendix C ROM Monitor
OL-6426-02