Basic And Additional Sip Services; Important Basic Sip Services; Required Parameters - Cisco ATA-186 Administrator's Manual

Basic and Additional SIP Services

This section provides information about key basic and additional SIP services that the Cisco ATA
supports:
•
•
•
The term Cisco ATA refers to both the Cisco ATA 186 and the Cisco ATA 188, unless otherwise stated.
Note

Important Basic SIP Services

This section provides descriptions and cross references for configuring required SIP parameters and also
for configuring other important basic SIP services:
•
•
•
•

Required Parameters

If the UseSIP parameter is set to 1 (you are using the SIP protocol), you need to supply values for the
required SIP parameters shown in
and a cross reference which provides a more-detailed description of the parameter.
See
Note
OL-3410-01
Important Basic SIP Services, page
configure in order for the Cisco ATA to function in a SIP environment.
Additional SIP Services, page
used SIP features, with references to the parameters for configuring these services.
Complete Reference Table of all Cisco ATA SIP Services, page
complete listing of Cisco ATA services supported for SIP, and includes cross references to the
parameters for configuring these services. This section includes services not described in the
sections about the key basic SIP services and the commonly used additional SIP services.
Required Parameters, page 4-1
Establishing Authentication, page 4-2
Setting the Codec, page 4-3
Configuring Refresh Interval, page 4-3
Chapter 5, "Parameters and Defaults,"
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
C H A P T E R
4-1—This section includes a list of parameters that you must
4-3—This section contains information about additional, commonly
Table 4-1. The Parameter column provides the name of the parameter
for information about additional Cisco ATA parameters.
4
4-12—This section contains a
4-1